skier888 寫:I will describe a specific, and simple steps to flex to release
at the end of the turn, gradually flex/shorten your outside leg until it is off the snow. this is the release. the outside leg is free, it is now the free foot
the weight is now on the little toe edge of inside leg. this is the weight transfer. the inside leg is the now the stance foot
tip your free foot toward the next turn. with the help of the gravity, your stance ski will change edge and engage the big toe edge to start the new turn. no pushing off the stance leg. ( if you do it correctly and slowly, your legs will show O-frame)
You can try this at home. If you agree this is one way to flex to release, you will see the elevator analogy does not fit what is happening.
Your center of gravity may go up (or down) somewhat but the up is never being pushed up by the stance leg. If the up happen, it is because the gravity pulling you over from one side of the ski to the other while standing on your stance ski (no push off).
The following is irrelevant but it explains some terms I use.
You can see my description is about legs. This is skiing with your legs, not your body.
You are now at the start of the turn, this is what I called the high-C portion of the turn. If you can continue to carve, the bases of your skis will be facing uphill and can be seen by people on the up hill. You are now skiing upside down. You may have a weightless feeling. You can also use high-C for speed control, the skiing will require less effort and the bottom part will be smooth. I consider this form of skiing using gravity to ski, not fighting. This is a simplified description. Other things need to work in order for this to happen. I do not invent this. I heard the CSIA demo team members mention high-C a few times in the videos too so it is common to all systems
大師插嘴
http://www.goski.com.tw/forum/showpost. ... tcount=162
這就是大師半懂的例子。因爲他半懂，半不懂就用想象的。結果是什麽都很簡單norman 寫:你在講刻滑吧？你說的這個只是基本刻滑而已，滑中彎，小彎一樣能走high c，只是沒出現刻滑線，不代表沒走high c，而是你在high c是讓雪板不受控制的隨他自然滑動，還是在你自己預期之內滑行，這是有差別的。這也是為什麼你沒有辦法往high c上方用雙腳往加壓踏上去，因為一過度加壓你就滑倒啦。
用想象的誤解了名詞與方法，説話牛頭不對馬嘴，所以什麽都說別人不懂，其實是他自己不懂 
